This RFID keyless system have a much smaller power consumption in standby mode compare to other RFID devices without sucking the battery power: best choice for bikes what are not moved every day on the street. Two power switches for ignition 20A and the start relay output 3A are integrated: this makes the installation clean and easy without the need of additional parts. A small piezo beeper comes together with the module and can be connected for an acoustic response of a successful recognized key. The easy RFID works with only one button: one press on the start button will activate the transponder module what looks for an electronic key (tag) and the module will activate the ignition output if a identified tag is beside of the module. One more press on the button will activate the starter relais. The starter relay output is on as long as the button is pressed: the ignition and the Easy RFID module switch off if the start button is pressed again for a time below 1/4 second. The module have a teach in function what allows to use different standard keys in combination with this device: just connect the orange cable to the ground and bring your tag in the area above the Easy RFID. The build in led in the main module will flash 3 or 4 times to indicate that the Easy RFID module knows and accept the tag for the bike in the future. However, the Easy RFID can learn the id of 2 different tags: a lost tag is not a challenge anymore. The maximum reading distance is about 6-8 cm, depending of the antenna dimensions of the used key and the mounted position.
Content: Easy RFID with connection cable, 1 chip tag and 1 card tag and instruction manual.
If you do not find the answer, please ask us a question.
Your question has been forwarded to our staff, we will notify as soon as will respond to your question.