|HONDA||CB 750 Four K2||1972-1975|
Functions: ignition, engine kill and lights on/off. Suitable for standard 22mm handlebars. Complete with double-cable desmo throttle control: with 60cm cable included (measured to the end of the shortest wire). OEM part number Honda: 35300-341-671.
Reproduction right side handlebar switch assembly suitable for various models Honda CB 550 and CB 750: this handlebar switch will fit on many of the Honda CB's, check your wiring harness and make sure the connectors will work. It's common for the starter button's on these bikes to wear out due to arcing or they can break for various reasons: corrosion and cracked solder joints on the stock switch make for an unreliable and unsafe switch. This is for use with a push pull throttle set up (you can just run a pull cable if you want). There is not a locator pin built into the switch like the stock ones but there is a hole in the switch that will accept the stock locator pin which keeps the assembly in place. This is an easy part to replace if your wires aren't running through the handlebars, if they are, it requires removing the handlebars and feeding the wires through. If you use an aftermarket handlebar please make sure that wire harness lenght 60cm (24.5" ) is enough: this switch has a total of 6 wires. This switch is handy to have since you can turn the lights off to save on power consumption during daytime riding.
No downloadable documents availabel
Any question about this product? Want more information about this product before buying it? Below you can find some Q&A from other clients, or ask your question to our staff and we will answer you as soon as possible.
If you don't find the answer requested you can ask us a question using the button below on the right
Your question has been forwarded to our staff, we will notify as soon as will respond to your question.