Electronic Box Version H

This is the smallest electronic box on the market. The box is able to control the main electrical functions of your motorcycle from a central location.

Functions:

• light control with switch and push button possible
• flasher control with switch and push button possible, emergency flash, 2 flashes when ignition on
• horn
• ignition relay

Due to a micro controller, you can use thin cable from the control box to the handlebars. This simplifies the wiring for laying cable in the handlebars. The flashing speed is about 90 cycles/minute and will not change if you use LED lights. A comfort flasher function can be activated and will turn off the turn signal automatically after 20 x or 40 x if no button is be pressed in the meanwhile. When using buttons you can activate an emergency flash function with simultaneously pressing the flashing buttons (for example, press and hold the left, right, press and hold the left release); this function will be stopped by pressing a button. A short warning flasher function (2x) can be activated when you turn on the ignition. The most functions can be changed without problems from the user. Just hold the horn button while switching on the 12V and the box is in the program mode after release the button. A short flash will indicate this status. You can change the function with pressing the left or right indicator button. You change to the next program mode with an additional press on the button; the indicators will flash 2 times in order to show you the status. The functions are written in the E-Eprom and can be changed to every time. Please note that you need to switch off the box for minimum 10 seconds in order to discharge the internal capacitors before you can change the settings again.

Features:

• dimensions: 40x12.5x25mm
• body material: shock resistant ABS plastic, waterproof
• connections: 0.5mm for input, 1mm for power output
• power consumption: 7mA
• max temperature: 100°C
• max current: 15A