Handlebar switch Classic left grey
Handlebar switch Classic left grey - Pictures 1
Handlebar switch Classic left grey - Pictures 2
Handlebar switch Classic left grey - Pictures 3

Handlebar switch Classic left grey

Code: 698385 - Brand: NoBrand
  • Available in: NOT IN STOCK
  • Status: New
  • Material: Alloy
  • Color: Grey
€ 32,95 VAT inc.

PRODUCT NOT AVAILABLE

Avvisami messaggio quando torna disponibile

DESCRIPTION

OEM reproduction left side handlebar switch assembly suitable for several Yamaha models: compatible with standard handlebars diameter 22mm. OEM part number Yamaha: 3H7-83972-00. Complete with 60cm wiring included (measured to the end of the shortest wire): 1 squared connector with 6 wires, 1 squared connector with 4 wiresand 3 wires with pin connecotrs. This is an easy part to replace if your wires aren't running through the handlebars, if they are, it requires removing the handlebars and feeding the wires through.

Functions:

  • horn with push button
  • winkers with 3 static positions on/off/on
  • lights with 2 static positions on/off and 2 static positions high/low

Dimensions:

  • width: 42mm
  • depth: 53mm
  • height: without top switch 53mm, total 65mm

Electrical wiring:

  • horn: pink ground
  • winkers: white/pink (+), violet (+) left winker, green dark (+) right winker
  • lights: blue (+), green light (+) lowbeam, yellow (+) highbeam, white/yellow (+) position light
  • gauge backlight: green/red (+)
  • (+) white
  • closing contacts with lights off white/green

 

Tip: check your wiring harness and make sure the connectors will work. It's common for the starter button's on these bikes to wear out due to arcing or they can break for various reasons: corrosion and cracked solder joints on the stock switch make for an unreliable and unsafe switch. If you use an aftermarket handlebar please make sure that wire harness is long enough.

Other Information

Warranty
Cafe Racer

FREQUENTLY BOUGHT TOGETHER

Customers who bought this product also bought the following products:

Handlebar switch Classic left grey Handlebar switch Classic left grey
Total Products: € 142,45
It is not possible to buy these products together - one of them is Currently not available

CUSTOMER QUESTIONS:

Find a question:
Buongiorno sto cercando il blocchetto elettrico sinistro per moto Yamaha TT 600 S anno 1992. Prima di procedere nell'acquisto vorrei avere conferma se questo e' compatibile e se esiste anche la versione nera. Grazie . Cordiali saluti. Debora
from Debora , August 3, 2019
Le allego il link al blocchetto elettrico Yamaha Replica in versione nera click here to view the link: questo blecchetto è sicuramente compatibile anche con Yamha TT 600 ma non sono in grado di assicurarle che il connettore elettrico sia identico a quello originale Yamaha. Nella scheda prodotto trova la descrizione del cablaggio da poter confrontare con quello del blocchetto originale.
Salve, vorrei sapere se si può montare su un xt 600 z tenere del 1984, primo modello con accensione a pedivella. Se è disponibile e le spese di spedizione per Catania. Grazie.
from Carmelo, April 11, 2019
Questo blocchetto elettrico a manubrio è universale e può sicuramente essere montato anche su Yamaha XT 600 Z Tenerè: non so dirle però se debba adattare il cablaggio opure no. Il blocchetto è disponibile a magazzino e la spese di spedizione in tutta Italia per ordini inferiori ai 150€ ammontano a 8.50€ i.i. mentre per ordini maggiori sono gratuite.
buonasera volevo sapere su che diametro di manubrio si puo montare
from luca, September 22, 2018
Il foro di fissaggio del blocchetto elettrico è da 22mm.
Vorrei sapere se è compatibile su una Guzzi California special del 2000 ed inoltre è affine per dimensione e fattura al Codice: 0105AB.5A - (Tomaselli) , visto che l’omologo sembra non essere più in produzione ? [email protected] Grazie
from Rino46, December 3, 2017
Le confermo che il blocchetto con il codice Tommaselli da lei indicato è ancora ordinabile: click here to view the link. Il blocchetto Yamaha replica come dimensione è abbastanza simile ma una funzione e soprattutto la posizione di uscita del cablaggio non le ritorneranno: questo blocchetto è pensato per essere monatato a sinistra quindi i cavi elettrici escono sulla destra. Inoltre si ritroverà il simbolo del clacson al posto di quello dell'accensione.
salve, vorrei sapere se il blocchetto è applicablie su manubri di diametro 25 mm, grazie.
from Simone Baggio, July 31, 2017
No, questo blocchetto elettrico è adatto per manubri da 22mm.
Ciao, è possibile sapere quanto misura in larghezza? Il pulsante più in alto sulla destra è momentaneo tipo lampeggio o è on/off? Grazie
from Giacomo, February 7, 2017
L'ingombro al manubrio di questo blocchetto è di 42mm. Il pulsante più in alto sulla destra è un on-off delle luci che poi vengono selezionate da anabbaglianti ad abbaglianti col selettore di sinistra, quello leggemrente più in basso. Non c'è il pulsante per il lampeggio.
from Officine08, February 9, 2017

RELATED PRODUCTS

PRODUCT REVIEWS

Rating:
2.0/5 on 1 reviews
Latest reviews:
by not registered on May 14, 2019
Verified Purchase
 
Verified Purchase

The user that left this comment also bought and tried this product.

economico ma non curato

Like this review ? 0
Please login to rate this review. Login

Shipping

  • Express Courier International
  • Withdrawal

Payment

  • Bank Money Transfert
  • Credit Card
  • PayPal