Battery MotoBatt MB10U 12V-14.5Ah

Motobatt has re-invented its batteries specifically for today's motorcycle market where the triple threat of high vibration, high starting loads and additional high powered accessory loads are all very common: Motobatt innovative internal power balanced design has been developed to overcome these problems. Many claims are made by different manufacturers about cranking capacity in fact there is little to be gained from a battery that cranks harder than what is required to start your bike. In battery design there is always a tradeoff: since battery size is limited by the application size, the more cranking power (increased number of thinner plates) you have, the less Ah capacity you get, and vice versa. The key is to balance the design to offer maximum Ah and CCA's to properly power all of your thirsty OEM and aftermarket accessories.

Advantages:

• Quad Flex terminal design creates a shorter current path to the battery cable resulting in quicker power delivery to the starter and improved starting ability
• safer fitment for additional accessory leads through supplementary terminal location
• the Motobatt is a factory activated battery: you never have to mess with acid or top up fluid levels
• the sealed, glass mat design has many longevity and reliability based benefits
• AGM batteries have a much lower inherent self discharge rate than wet flooded types.

Motobatt model MB10U features:

• dimensions: height 146mm, width 135mm, depth 90mm
• capacity: 12V, 14.5Ah
• cold cranking amps (CCA): 175A at -18 degrees
• 4 terminals
• maintenance free

Standard batteries replaced by Motobatt model MB10U: 12N103A, 12N103A1, 12N103A2, 12N103B, YB10AA2, YB10LA2, YB10LB, Y10LB2, 12N113A, 12N113A1 and 12N113B.